Télécharger Imprimer la page

Maico ECA 100 ipro Notice De Montage Et Mode D'emploi page 26

Aérateurs pour petites pièces

Publicité

12 Spare parts
Switch off mains fuse, secure against being acci-
dentally switched back on and position a warning
sign.
Fault
Fan does not switch
on.
Fan does not switch
off.
Motor's thermal over-
load protection
switches the fan off.
Lamellae do not open
or close for K units.
Fan does not switch
off or fan switches on
when not wanted.
26
Cause, measures
• Start delay approx
(max. 120 seconds).
Wait for start delay and
reduce if necessary.
• No mains voltage.
Check whether the
mains fuse has failed.
Switch on if necessary.
• Impeller blocked.
Should only be car-
ried out by a trained
specialist: Remove
cover. Unlock internal
grille or internal shutter
via locking hooks.
Check impeller and
clean if necessary.
• Overrun time (max. 25
min.). Wait for overrun
time and reduce if ne-
cessary.
• Motor too hot. Wait un-
til the motor has cooled
down. Cool-down time
can be up to 10
minutes. Unit switches
back on automatically
after cooling down.
• Lamellae very dirty or
blocked. Clean lamel-
lae.
• Check whether there
are any objects
between the lamellae.
If so, remove them.
• Check whether wiring
is correct according to
wiring diagram 1 (high
level). Attach jumper
between terminals 1
and 2.
• A high-impedance
voltage is present at
terminal L1 due to a
glow lamp in the con-
trol switch, cables laid
in parallel (induction) or
12 Spare parts
In case of questions, please contact:
Maico Elektroapparate-Fabrik GmbH
Steinbeisstraße 20
78056 Villingen-Schwenningen, Deutschland
Tel. +49 7720 694 445
Fax +49 7720 694 175
E-mail: ersatzteilservice@maico.de
Spare parts can be ordered at www.shop.maico-
ventilatoren.com.
12.1 Spare parts for ECA 100 ipro
Spare parts may only be sourced from and
fitted by a specialist installer.
ECA 100 ipro
1 Printed circuit board, PL
ABDE ECA 100 ipro
2 Electronics cover, ABDE
ECA 100 ipro 1
3 Grille, standard
4 Cover, cpl., ABD ECA
100 ipro 1
transformers or other
electrical components.
Recommendation: Wire
X2 capacitor (220 nF/
250 V) to zero.
E101.1404.0000
E059.2010.0000
0059.2012.0000
E059.2022.9000

Publicité

loading

Ce manuel est également adapté pour:

Eca 100 ipro vzcEca 100 ipro fEca 100 ipro hEca 100 ipro bEca 100 ipro kEca 100 ipro kvzc ... Afficher tout