Stihl FSE 31 Notice D'emploi page 37

j) When operating the machine, always wear
clothing that covers your legs, such as pants.
Contact with the rotating cutting element or
lines may cause injuries.
k) Keep bystanders away from the area where
the machine is operated. Ejected parts may
cause serious injuries.
Do not operate the machine higher than
l)
waist level. This will avoid unintended con‐
tact with the cutting element and will enable
better control of the machine in unexpected
situations.
m) Do not operate the machine in wet grass.
Walk when you operate the machine, never
run. You will thereby reduce the risk of slip‐
ping or falling, which may result in injury.
n) Do not operate the machine on overly steep
slopes. This will reduce the risk of losing
control, slipping or falling, which may result
in injury.
o) When working on slopes, always make sure
you have a firm footing; always work across
the slope, never up or down and always be
extremely careful when changing the direc‐
tion of work. This will reduce the risk of los‐
ing control, slipping or falling, which may
result in injury.
p) Keep all power cables away from the cutting
area. Power cables may be hidden in hedges
or bushes and may accidentally be damaged
or nicked by the cutting element.
q) Keep all parts of your body away from the
rotating cutting element or cutting lines.
Never remove any material from the machine
unless you have disconnected the machine
from the power supply. The rotating cutting
element or the cutting lines may result in
serious injuries.
When carrying the machine, always make
r)
sure that it is turned off and turned away
from your body. Proper handling of the
machine will reduce the likelihood of acci‐
dental contact with the rotating cutting ele‐
ment or cutting lines.
s) Only use replacement cutting heads as well
as plastic cutting lines and elements accord‐
ing to the manufacturer's specifications.
Wrong spare parts may result in loss of con‐
trol, breakage or injuries.
Do not replace the plastic lines or blades
t)
with metal wires or blades. Use of the
0458-280-9621-B
machine with cutting elements that are not
recommended may result in injuries.
Table des matières
1 Indications concernant la présente Notice
d'emploi.....................................................37
2 Prescriptions de sécurité et techniques de
travail........................................................ 38
3 Utilisation.................................................. 43
4 Montage des dispositifs de sécurité..........44
5 Ajustage du fil de coupe............................45
6 Réglage des poignées.............................. 46
7 Réglage de l'angle de travail.....................47
8 Transformation en dresse-bordures..........47
9 Branchement électrique............................ 47
10 Mise en marche........................................ 48
11 Arrêt.......................................................... 48
12 Rangement............................................... 48
13 Remplacement du fil de coupe................. 49
14 Instructions pour la maintenance et l'entre‐
tien............................................................ 49
15 Conseils à suivre pour réduire l'usure et évi‐
ter les avaries............................................50
16 Principales pièces..................................... 51
17 Caractéristiques techniques......................51
18 Instructions pour les réparations...............52
19 Mise au rebut............................................ 52
20 Déclaration de conformité UE................... 53
21 Déclaration de conformité UKCA.............. 53
22 Adresses................................................... 54
23 Indications générales de sécurité pour outils
électroportatifs.......................................... 54
1 Indications concernant la
présente Notice d'emploi
1.1 Pictogrammes
Tous les pictogrammes appliqués sur le dispositif
sont expliqués dans la présente Notice d'emploi.
français
37