Stihl FSE 31 Notice D'emploi page 30

English
When the power tool is not in use, store it in such
a way that it does not endanger others.
Secure it against unauthorized use.
12 Storing the Machine
If not used for about 30 days or longer
► Thoroughly clean the machine, especially the
ventilation slots
► Take out the spool, clean it and check it for
damage
The resilience and service life of the mowing line
can be increased by storing it in a container filled
with water.
► Store the machine in a dry and secure loca‐
tion. Keep out of the reach of children and
other unauthorized persons
13 Replacing Nylon Line
13.1 Preparations
► Switch off the trimmer.
► Disconnect the plug from the wall outlet.
► Turn the trimmer on its back.
13.2 Removing Remaining Nylon
Line
In normal operation, the supply of nylon line in
the head is used up completely.
13.3 Removing the Spool
2
1
30
4
3
2
5
► Hold the housing (1) steady.
► Press in the tabs (2) and remove the cover (3).
► Pull the spool (4) out of the housing.
13.4 Installing a New Spool
5
► Use nylon line with a diameter of 1.4 mm.
► Thread the ends of the lines through the open‐
ings (5) in the housing (1).
► Place the spool (4) in the housing.
► Press home the cover (3) until both tabs (2)
engage with a audible click
12 Storing the Machine
3
2
4
5
1
0458-280-9621-B