Scan And Copy - HP SCANJET ENTERPRISE 9000 Guide De Démarrage Rapide

1
2 and 3
TIP: Many documents scan faster if the longer edge is inserted first into the
document feeder. However, you should avoid feeding a document with a leading
edge that has been folded or frayed. When you begin scanning, select a profile
whose page loading selection matches the edge you are feeding first to ensure
that the scan reflects the orientation of the original document.
6. Verify that the paper guides are aligned with the edges of the stack.
Load cards
To load cards into the document feeder, follow these steps:
1. Place the stack of cards face down with the long dimension parallel to the paper
guides.
2. Adjust the paper guides to center the original. Make sure the paper guides touch the
edges of the original.

Scan and copy

This section provides methods and tips for scanning and copying.
If the document's longest edge is greater than 300 mm (11.8 in), load the
document short edge first.
If the document's longest edge is less than 300 mm (11.8 in), load the
document either long edge first (2) or short-edge first (3).
Scan and copy 15