Publicité
the hose cuff 3. Cardboard portion of the
filter bag 4. Hose cuff
4.
Lock the front cover certainly.
CAUTION:
Be careful not to pinch your fin-
gers when hooking the latch, and when closing
the front cover.
Harness cover
Optional accessory
When using the harness cover, follow the procedure
below to attach it.
NOTE: When installing the harness cover, do not
mistake the front and back of the harness cover.
NOTE: The harness cover is washable. Follow the
washing instructions on the tag.
► Fig.29
1.
Spread the harness cover on the harness.
► Fig.30
2.
Secure the harness shoulder straps with the hook
and loop fasteners of the harness cover. Hook the band
of the harness cover on the harness.
► Fig.31
OPERATION
WARNING:
Operators shall be adequately
instructed on the use of the vacuum cleaner.
WARNING:
This vacuum cleaner is not suit-
able for picking up hazardous dust.
CAUTION:
This cleaner is for dry use only.
CAUTION:
During operation, be conscious
of the vacuum cleaner on your back. You may
lose your balance if the vacuum cleaner body bumps
against a wall or the hose is hooked by an obstacle.
1.
Shoulder the vacuum cleaner body and fas-
ten upper and lower belts. Adjust the tightness as
necessary.
► Fig.32
2.
Press
button to start vacuuming. If you want
to change the suction power, press
desired suction power is selected. Press
stop.
► Fig.33
During the operation, hook the switch box on the lower
belt or the D-ring.
► Fig.34: 1. D-ring 2. Lower belt
3.
Replace the filter bag when it becomes full. Open
the front cover and take out the filter bag. Pull the strip
on the side of the opening to shut the filter bag and
dispose of the filter bag in whole.
► Fig.35: 1. Strip
When using a dust bag, take out the dust bag and
dispose of the dust by releasing the latch.
► Fig.36: 1. Latch
NOTICE:
heavy objects on the front cover. The appliance
may fall down.
NOTICE:
whether the filter is full or not. Continuous use with
the filter bag full results in reduced suction power.
NOTICE:
bag is designed for single use. Using filter bag repeat-
edly may cause clogging of the filter and results in
damage to the cleaner. If you want to use the bag
repeatedly, use a dust bag.
WIRELESS ACTIVATION
FUNCTION
What you can do with the wireless
activation function
The wireless activation function enables clean and
comfortable operation. By connecting a supported tool
to the cleaner, you can run the cleaner automatically
along with the switch operation of the tool.
► Fig.37
NOTICE:
ual of the tool when using the cleaner with wire-
less activation function.
NOTICE:
wireless unit.
NOTICE:
of the wireless unit, always close the lid securely
during operation and storage.
NOTICE:
the power is being supplied. Doing so may cause a
malfunction of the wireless unit.
NOTICE:
button too hard and/or press the button with an
object with a sharp edge.
button until the
button to
20 ENGLISH
Do not put filter bag/dust bag or other
Periodically check the filter bag
Do not use a used filter bag. The filter
Be sure to refer to the instruction man-
Do not disassemble or tamper with the
To prevent dust coming into the slot
Do not remove the wireless unit while
Do not press the wireless activation
Publicité
