Publicité
8. Ensure the Mounting Brackets sit securely on the Wall Mount Brackets as shown
below.
Display
9. Repeat Step 2~3 for the second Cabinet, ensuring it sit securely on the Wall Mount
Brackets.
10. Install the first and second Cabinets together with the provided screws (M8 x 20
mm).
11. Check for unevenness of the Cabinets by rubbing the cross section between each
Cabinet. If the cross section is not aligned, loosen the M8 screws slightly and tap the
Cabinets until the cross section is flat.
12. Assemble and install the remaining Cabinets in the same manner as the first two
Cabinets. Ensure the Mounting Brackets sit securely on the Wall Mount Brackets, and
that the Cabinets are properly secured together.
NOTE:
Refer to Appendix B to identify the Cabinets and installation sequence.
13. After installing all Cabinets, cut the rubber hole plugs to size along the cross with a
knife (see Appendix B for the position of the hole plugs).
Mounting Brackets
Display
Wall Mount Brackets
6
Publicité
