Publicité
Introduction
The step-by-step instructions in this guide are a general reference for installing the LED
Display. If any details in this document are unclear, please contact your reseller for more
information.
Before Installing
Ensure there is no direct airflow from air conditioning or heating vents blowing on
the LED Display.
Avoid installing the LED Display in places with high humidity.
Due to high power usage, always use power cords specifically designed for this
product.
Wood may split if holes are not pre-drilled before installing the Wall Mount Brackets.
Ensure the deviation of the wall surface is < 5 mm.
Wear protective gear, such as gloves and protective shoes, when handling the LED
Display.
Due to the size and weight, it is recommended that two or more people handle it.
Wall Mounting
Before the installation, please ensure the Wall Mount Brackets supplied in the case match
the ones illustrated in Appendix A.
1. Please take a moment to check the following when deciding the installation location.
However, for the best results, it is recommended to ask your reseller or licensed
professional to install the LED Display.
• The wall space.
• The wall type.
• The power consumption.
• The installation type.
• Cable pathways between the Cabinets, and between the Cabinets and System
Control Box.
NOTE:
Refer to Appendix A for the detailed instructions on mounting the Wall
Mount Brackets, including minimum space requirements.
2. Install the first Upper Wall Mount Bracket with the provided screws (M8 x 80 mm
Expansion).
3. Repeat Step 2, ensuring the second Upper Wall Mount Bracket is level with the first
Upper Bracket.
NOTE:
It is recommended to use a laser or torpedo level.
4
Publicité
