Publicité
Installing the LED Modules
Please wear Anti-Static Gloves before handling the LED Modules.
To avoid direct contact with the LED Modules, please remove watches, rings,
bracelets, or other metal objects.
Use caution when installing the LED Modules.
1. Starting from the LED Module labeled "1", align each LED Module with the Cabinet,
then carefully press the Module into place.
NOTE:
The arrow marks on the back of the LED Modules should be pointing up.
2. Attach the remaining LED Modules onto the Cabinets. Install from top left and move
to bottom right, ensuring to match the corresponding numbers on the Module to the
Cabinet. See Appendix C for further guidance on the LED Modules.
NOTE:
Before installing the LED Module, ensure that each Module is flush and that
there is little to no gap between each. It may be necessary to gently tap the
module to make it flush.
14
Publicité
