Publicité
Installing the Screen Bezels
The Screen Bezels' plastic tabs are pre-installed onto the Bezels. Ensure all plastic
tabs are properly mounted before installing the Screen Bezels onto the screen.
The label indicates the top of each Screen Bezel. To ensure the Bezels are installed in
the correct position, please use the labels on the inside of the Bezels as a guide.
1. Place the Screen Bezel to the correct side of the screen to attach. Start from the left
and move to the right (See Appendix C for the location where each Screen Bezel
should be installed).
NOTE:
• Ensure the label side of the Screen Bezel is facing the screen.
• Before installing the Screen Bezels, check the label of each Bezel as the label
helps you know which side ("L" = left side & "R" = right side) to attach.
• If a Screen Bezel does not seem to fit, lift it up with caution and check if it is
on the correct side to install. If the Bezel does not seem to fit at all, please
contact your reseller. DO NOT force it into place.
2. Align the plastic tabs of the Screen Bezel with the holes provided in the screen.
3. Press down on the Screen Bezel until you hear it click into place.
4. Place the remaining Screen Bezels onto the left and right sides of the screen.
Plastic tabs
15
Publicité
