Publicité
21. Thread the Power and Network Cables through the holes at the lowest row of the
Cabinets to the front.
NOTE:
Ensure to match the corresponding letters on the Cables to the Cabinets (A
to A, B to B, C to C, and so on).
22. Carefully place the Lower System Control Box Mount Brackets onto the Upper System
Control Box Mount Brackets.
23. Ensure the Lower System Control Box Mount Brackets sit securely on the Upper.
24. After installing the System Control Box, connect the Power and Network Cables from
the System Control Box to each Cabinet. Start from the bottom and move to the
top (see Appendix B for example system wiring diagrams, including wire colors and
connection points).
Cabinets
System
Control
13
Box
Publicité
