How To Clean The Cooling Fan Of The Switchboard - OEM SUPERTOP Mode D'emploi

(Version with removable glass)
• Remove the glass (1) using your fingers or a flat tool.
• Replace bulb (2).
• Reassemble the glass (1) pushing it towards the
frame (3).
ATTENTION
It is an halogen lamp do NOT touch with
our fingers.
6.1.d.b - How to clean the cooling fan of the switch-
board (Fig. 4)
In case the oven displays the trouble report "TECHNICAL
COMPARTMENT/POWER BOARD OVERHEATING",
you shall provide cleaning the cooling fan of the
switchboard as follows:
• remove the right-hand side (1) and provide
removing the dirt settled on the fan, by means of
jets of compressed air.
In the event the oven shows again the
aforementioned trouble report, please
contact our technical service personnel.
EN - 44
IMPORTANT
SUPERTOP - SUPERTOP VARIO
1
2
3
Maintenance
FIG. 4
2
FIG. 5
1
1