OEM SUPERTOP Mode D'emploi page 77

SUPERTOP - SUPERTOP VARIO
Installation and connections
3.5.a - Assembling the chimney (Fig. 8)
• Assemble the box (1) on the top part of the oven,
screwing it in with screws (2)
• Assemble the chimney (3) locking it onto box (1) by
means of plate (4) with screws (5).
The chimney must be assembled on the
last top oven.
• Connect the chimney ( ) to a flue by means of a pipe
with diameter of 120mm.
3.5.b - Water connection (only for steamer)
(Fig. 9)
It is recommended to feed the steamer with
demineralized water to minimize the crea-
tion of limestone inside the vaporizer.
Load
• Connect the water supply pipe to the 3/4" junction of
the electrovalve.
Exhaust
• Connect the fle ible e haust pipe to the 21 mm di-
ameter unction (2) and fi it with a band.
After having carried out the water supply
fitting open the ater suppl tap and chec
that there is no water loss.
IMPORTANT
IMPORTANT
IMPORTANT
120 mm
4
3
1
1
FIG. 8
5
2
2
FIG. 9
EN - 19