Publicité
How To Use Your Gas Cooktop
The position of the corresponding gas burner is indicated on each
control knob.
Gas burners
The burners are different in size and power. Choose the most
appropriate one for the diameter of the cookware being used.
The burner can be regulated with the corresponding control knob by
using one of the following settings:
O F F
OFF
L IT E
High&Lite
H I
Low
L O
On those models tted with a safety device
The knob must be pressed for about 6 seconds until the flame is lighted
and warmed up.
On those models tted with an ignitor
The ignition button, identified by the symbol, must be pressed first, then
the corresponding knob is pushed and turned in the counter-clockwise
direction to the "High" setting.
Some models are equipped with an ignition switch incorporated into the
control knob. If this is the case, the ignitor is present, but not the switch
(the "Lite" symbol is located near each knob).
To light a burner: Simply press the corresponding knob and turn it in the
counter-clockwise direction to the high setting, keep press until the
burner is lighted.
Caution: If the flame goes out accidentally, turn off the gas with the con-
trol knob and try to light it again at least 1 minute later.
To turn o a burner: Turn the knob in the clockwise direction until it is
stopped(it should be on the "
02
O F F
" setting).
Publicité
