Publicité
O F F
L IT E
H I
L O
-Burner ON,
large flame
See fig.8 for various operating options(flame size selection). The burner
should be set at a large flame during the initial phase of cooking, it make
food boil quickly. Then should turn knob to the saving flame position to
maintain the cooking. It is possible to adjust the flame size stepless.
It is prohibited to adjust the flame between the burner off and burner on
large flame positions. High quantity of energy can be conserved if the
cooktop is used correctly, parameters are designed correctly, and
appropriate cookware is used. The energy conservation be as follows：
● Up to 60% are conserved when proper pots are used,
● Up to 60% are conserved when the unit is operated correctly and the
suitable flame size is chosen.
It is a prerequisite for efficient and energy-saving operation of cooktop
that the burners are kept clean at all times(in particular the flame slots
and nozzles).
Pressure regulator adjustment
Please do remember that pressure regulator adjustment should be done
by a qualified technician.
Remove the cap of gas regulator, adjust the spring(see fig.9) to convert
the gas to be LPG; and convert gas type to be NG by inverting the spring
and install it(see fig.10).
14
O F F
L IT E
H I
L O
-Burner ON,
small flame(saving mode)
Fig. 8
Fig. 9 LPG
O F F
L IT E
H I
L O
-Burner OFF
Fig.10 NG
Publicité
