Publicité
Maintenance and Malfunction Treatment
1) The surface of the treadmill should be kept clean, remove the
power cord before cleaning. You can clean the tread and surface
of the treadmill with a soft, damp cloth.
2) The treadmill is factory set, it may not work properly after
transport or use. Stop the treadmill before adjusting, pull the
treadmill to the centre and adjust the left and right rear roller bolts
with a hex key (see figure). It is recommended to adjust one half
turn at a time. Then turn the switch and check if the mat is 10
turns off when the speed is about 4 to 5 km/h.
Warning: To prevent electrical shock, make sure the treadmill is turned off and unplugged before cleaning
or performing routine maintenance.
LUBRICATING THE TREADMILL AND DECK
To extend the life of this treadmill, the treadmill requires regular lubrication, which is general maintenance
for the machine. The routine maintenance procedure will prevent premature wear of the treadmill and
motor system. The recommended lubrication schedule is as follows:
This schedule corresponds to the recommended application for an individual user, up to 20-30 minutes at a
time, 3-4 times a week.
CLEANING
Perspiration should be wiped off the console and treadmill surface after your workout. You should wipe your
treadmill once a week with a soft, damp cloth. Do not over-moisten the display panel as this may cause
electrical and electronic problems.
STORAGE
Store your treadmill in a clean, dry place. Make sure it is turned off and the plug is unplugged.
MOVING
This treadmill has been designed and equipped with wheels for easy movement. Before moving it, make
sure it is turned off and the plug is unplugged.
LUBRICATION USE
1-6 km/h Every 6 months
6-12 km/h Every 3 months
12-16 km/h Every 2 months
- 32 -
Publicité
