Thermador Professionalfi Serie Guide D'installation page 10

en-us Installation requirements
Cabinet clearance requirements with island trim
A 13" (330 mm)
B 6" (152 mm)
Δ
C 30" - 40" (762 mm - 1016 mm)
Δ
D 18" (457 mm)
E 5" (127 mm)
F Depending on model:
36" (914 mm)
¡
48" (1219 mm)
¡
G 0" (0 mm)
H 23⅞" (606 mm)
Δ as defined in the "National Fuel Gas Code" (ANSI
Z223.1, Current Edition). Clearances from non-
combustible materials are not part of the ANSI Z21.1
scope and are not certified by CSA. Clearances of less
than 6" (152 mm) should be approved by the local codes
and/or by the local authority having jurisdiction. There is a
possibility to discolor the back wall under certain
cooking conditions.
10
Cabinet clearance requirements with low
backguard (purchased separately)
A 13" (330 mm)
B 0" (0 mm)
Δ
C 30" - 40" (762 mm - 1016 mm)
Δ
D 18" (457 mm)
E 5" (127 mm)
F Depending on model:
36" (914 mm)
¡
48" (1219 mm)
¡
G 0" (0 mm)
H 23⅞" (606 mm)
Δ as defined in the "National Fuel Gas Code" (ANSI
Z223.1, Current Edition). Clearances from non-
combustible materials are not part of the ANSI Z21.1
scope and are not certified by CSA. Clearances of less
than 6" (152 mm) should be approved by the local codes
and/or by the local authority having jurisdiction. There is a
possibility to discolor the back wall under certain
cooking conditions.