Prepare The Receiver Collar; Charge The Receiver Collar - Petsafe 400m Trainer Manuel D'utilisation

Prepare the Receiver Collar

Charge the Receiver Collar

1. Lift the rubber cover protecting the Receiver
Collar Charging Jack.
2. Connect one of the charger connectors to the
Receiver Collar Charging Jack.
3. Plug the charger into a standard wall outlet.
4. Charge the Receiver Collar for 24 hours
for the fi rst charge. Recharges take only 12
hours.
Note: The Receiver Indicator Light will fl ash
after 12 hours of charging. For the fi rst charge,
continue to charge the Receiver Collar for an
additional 12 hours.
5. When charging is completed, replace the
rubber cover.
www.petsafe.net
Charger connector
placed in Receiver
Collar Charging
Jack
3