Publicité
Basic Operation
Selecting the Dolby Digital and DTS Surround
mode (only with digital input)
1
Select an input source for which digital (COAXIAL or
OPTICAL) is set (
page 47).
2
INPUT MODE
Press
to select "AUTO".
3
[STANDARD]
Press
to select "STANDARD (Dolby/DTS
Surround)".
4
Play a program source with the
• "
" or "
" lights, depending on the source.
5
SURROUND PARAMETER
Press
.
6
D D H H
Press
to select the item, then press
CINEMA EQ.:
Use this if movie dialogues sound harsh to lower the treble sound.
Effective source mode
II
Dolby Pro Logic
x / Dolby Pro Logic / Dolby Digital /
DTS Surround / DTS NEO:6
D.COMP.:
The dynamic range is compressed. Select one of four modes: "OFF",
"LOW", "MID" (middle) or "HIGH".
Effective source mode
Dolby Digital /
DTS (For DTS sources, only displayed for compatible software.)
LFE:
To play the various types of software properly, we recommend
setting to the values shown below.
• To play Dolby Digital software: "0 dB"
• To play DTS movie software: "0 dB"
• To play DTS music software: "–10 dB"
TONE:
Adjust the tone control.
Can be set in surround modes other than direct mode.
Can be set separately for the different surround modes. (Adjusted
together for the Dolby/DTS SURROUND modes.)
SB CH OUT:
Select the play mode or surround back channel playback method.
• The "
" or "
(1) For multi-channel sources
• SB OFF (OFF):
Not played.
• NON MTRX:
,
mark.
Surround channel signal played.
• MTRX ON:
Surround channel signal played with digital matrix processing.
• ES MTRX:
DTS signal played with digital matrix processing.
• ES DSCRT:
Signal included in DTS-ES discrete 6.1-channel sources played.
F F G G
to set.
II
• PL
x CINEMA:
Decoded in Dolby Pro Logic
played.
Set the surround back speaker to "2sp" at "Speaker
Configuration" (
II
• PL
x MUSIC:
Decoded in Dolby Pro Logic
played.
Set the surround back speaker to "1sp" or "2sp" at "Speaker
Configuration" (
(2) For 2-channel sources
• OFF: Not played.
• ON: Surround channel signal played.
7
ENTER
Press
or
5
Example: Dolby Digital
" indicator lights.
II
x Cinema mode, surround back signal
page 54, 55).
II
x Music mode, surround back signal
page 54, 55).
SURROUND PARAMETER
.
Example: DTS
24
ENGLISH
• Select "Default Yes" and press F F to reset all the settings.
¢ Dialog normalization function
This operates automatically when playing Dolby Digital sources.
This is a function for automatically correcting the standard signal level
for different program sources. The correction value can be checked by
pressing STATUS.
D i a l . N o r m
O f f s e t
- 4 d B
The numbers are the correction value when corrected to the standard level.
ENGLISH
Basic Operation
Publicité
