Publicité
4. Operating instruction
4.1Treadmill operating instruction
4.1.1Standby mode operation
Put the special power wire insert to treadmill socket, another end of power wire is connected to the environment
working voltage (the environment working voltage must be in conformity with requirements of the treadmill).
Connect the power, the treadmill enters to standby mode, Distance window shows preset program ,other windows
show initial value "0".
4.1.2 Start treadmill operation
In standby mode, press START
key, treadmill start to running, each window shows current exercise data
accordingly. Matrix window displays dynamic runway and number of lap, each lap is 400 meters. At the same time,
you can select speed or incline key
to adjust speed or incline as you like, press stop key
to pause or
stop running.
4.1.3 Exercise program operating instruction
The treadmill is equipped with 9 kinds of intelligent exercise program wiht different level of internsity. Exerciser
can choose a appropriate exercise program according to his age, gender, weight and other parameters as well
as exercise purpose.
When use intelligent program, you need to use setting key
to proceed relevant setting, press Enter key
to confirm; press Clear key
to modify the setting; Press P1-P9 direct key
-
to select
intelligent program as you like, press Stop/Pause key
to exit when selected, then you can select another
program.
4.1.4 Intelligent Exercise program operation schematic diagram
P1: Heart Rate Control Program
Publicité
