Publicité
Tips:
If the capacitance being measured is ≤1µF, perform a zero adjustment to re-
move stray capacitance in the test leads and internal circuitry. This will improve
measurement accuracy.
1. Enter capacitance measurement mode.
2. Press the ZERO button, the display will show "ZERO".
A zero adjust has been performed.
à
11 Testing
IMPORTANT! Always observe the information contained in the section:
Safety instructions
DANGER
Risk of electric shock!
Never exceed the maximum permitted input values for this
product.
Use caution when circuits may contain voltages above 30 V/AC
rms (42.4 V peak), 60 V/DC.
[} 41].
57
Publicité
