Publicité
9.2 Power ON / OFF
■
The product is switched off when the function switch is in the OFF position.
■
Switch the power OFF after use.
9.3 Auto shut-off
■
Auto shut-off is active by default, it is indicated by the
■
This energy saving feature will shut power off after approximately 15 minutes of
no activity.
To disable auto shut-off:
1. Set the rotary switch to OFF.
2. Press and hold the SELECT button and then set the rotary switch to any posi-
tion other than OFF.
The
symbol will disappear and an alert will sound when disabled.
à
3. Auto shut-off will reactivate after the power is switched OFF.
9.4 Display hold
Important:
– The display hold function freezes the display.
– The display hold should be switched OFF before taking measurements.
■
Press the HOLD button to switch display hold ON/OFF.
■
The hold icon
9.5 Maximum / minimum value display
In this mode the display shows the "MIN" (minimum) or "MAX" (maximum) value
measured.
1. Press and hold the REL/ZERO [MAX/MIN] button to enter maximum / minimum
value display mode.
2. Press the MAX/MIN button repeatedly to toggle between modes.
The display will show "MAX" or "MIN" to indicate which mode is active.
à
3. Press and hold the MAX/MIN button to exit this mode.
48
will appear when display hold is ON.
symbol.
Publicité
