Publicité
10.2 Voltage measurement "V"
WARNING: Observe all safety precautions when working on live
voltages.
10.2.1 AC voltage measurement
1. Set the rotary switch to: V~.
The display will show "AC" and "V".
à
2. (Optional step) press and hold the SELECT [V.F.C] button to switch the low-
pass filter ON/OFF. The display will show "VFC" when it is active.
3. Connect the test leads to the input terminals:
- Black test lead to the negative input terminal: COM.
- Red test lead to the positive input terminal: V.
4. Touch the test probe tips across the circuit or component under test. It may
take a few moments for the reading to stabilize.
The measurement will show on the display.
à
The display will show icon
à
ceeded or the circuit is interrupted.
5. Disconnect the test leads and switch the power OFF after use.
(overload) if the measuring range is ex-
53
Publicité
