Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5.2.1 CHANGING THE LANGUAGE
To change the language of the Profi ler menu, enter the "CONTROL UNIT - LANGUAGE" menu and set the
To change the language of the Profi ler menu, enter the "CONTROL UNIT - LANGUAGE" menu and set the
language you want by pressing the
German and English.
5.2.2 CHANGING THE SAFETY CODE
To enable/change the safety PIN code used to enter the programming, enter the "CONTROL UNIT - USER
CODE" menu.
NOTES:
•
Default PIN code: 1234
•
The code will be comprised of a maximum of 4 digits
•
It is not possible to set a code if the fi rst digit is "0"
It is not possible to set a code if the fi rst digit is "0"
•
Press the
key to return to the previous menu and undo the code's modifi cation
•
If the user code is lost, contact Fracarro Technical Support.
5.2.3 USB MEMORY MENU
LOADING THE CONFIGURATION FILE
By means of a pen drive, a confi guration that was previously memorized or saved from a PC can be loaded
into the CONTROL UNIT - UBS MEMORY.
When the display shows "insert USB" insert the pen drive and press
scroll down the fi les within the pen drive, wait for the initialization and select the confi guration fi le that you
want by pressin
to load the confi guration into the unit. A message will be displayed when the operation
is complete.
It is possible to load a confi guration of another FIL or a product of the FRPRO series with the same number
of clusters (i.e: for FIL 10 it is possible to load the confi guration of FRPRO10 but not FRPRO 06).
Note:
•
Loading a confi guration of another model, all parameters will be loaded (PIN code and language set-
tings included).
•
If the message "loading OK" is not displayed, repeat the procedure.
•
The FIL unit does not accept fi le longer than 16 digits. If a longer fi le is uploaded, the unit will display
the message "Loading error".
SAVING THE CONFIGURATION FILE
To save a confi guration from the FRPRO unit to the pen drive, use the "SAVE AS" menu.
When the message "insert USB" appears, insert the pen drive, wait for the initialization and press the
the FRPRO will propose the name "Confi guration1." To change the fi le name, use the keyboard and the left/
the FRPRO will propose the name "Confi guration1." To change the fi le name, use the keyboard and the left/
right arrows to move along the letters (the entered letters can be cancelled by pressing the
right arrows to move along the letters (the entered letters can be cancelled by pressing the
the
key to save the FRPRO confi guration onto the pen drive.
Note:
•
Accepted formatting for the pen drive: FAT-12, FAT-16, FAT-32 (MS-DOS).
•
The pen drive cannot have two or more partitions and/or a proprietary fi le system.
•
The confi guration fi les must be saved in the root (principal directory) of the memory (the FRPRO does
not allow access to the sub-folders).
•
The name of the confi guration fi le must not exceed 16 letters ( "cpr" extension not included)
•
Characters allowed in the fi le name: -, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, a, b, c, d, e, f, g, h, i, l, m, n,
•
o, p, q, r, s, t, u, v, z, (, ), _, A, B, C, D, E, F, G, H, I, L, M, N, O, P, Q, R, S, T, U, V, Z.
key. The available languages are Italian, French, Spanish, Portuguese,
31
; Use the DOWN arrow to
key,
key). Press
Publicité
Table des Matières
