Programming Instructions; Key Function - Fracarro FRPRO 06 Instructions D'emploi

4.1 DEFAULT PROGRAMMING
Installer code
Language
Remote power
Gain adjustment of UHF inputs (dB)
Gain adjustment of B.III+DAB input (dB)
Gain adjustment of FM input (dB)
Gain adjustment of AUX input (dB)
Gain adjustment of the cells (dB)
Final gain adjustment (dB)
Cluster-inputs association
Cell status
The Profi ler unit can be programmed through the unit keyboard or through the PC software.
To program by means of the PC, see chapter "6. Programming software."
Use the keyboard and the display that the product is equipped with in order to program and display the
unit's status.
To enter the programming menu, press the key
To change the language of the menu, enter the "HEADEND - LANGUAGE" menu of the Profi ler unit and To change the language of the menu, enter the "HEADEND - LANGUAGE" menu of the Profi ler unit and
select the language you want by pressing the
For all programming operations and for interpreting the programming menus indicated in the following fl ow-
charts, refer to the following legend:
Keypad
✓ or
➤
✗
or
➤
0 9
......
WXYZ
S
NOTE: The set parameters are automatically saved when you exit the menu, even if you don't press the NOTE: The set parameters are automatically saved when you exit the menu, even if you don't press the
"Save" " " key.
Menu

5. PROGRAMMING INSTRUCTIONS

To confi rm an entered value or to select a menu/submenu
Default parameters
Flexible and programmable
and enter the user code (default 1234).
key.

Key Function

To cancel an entered value or exit a menu
To scroll through menu items
Used to modify the parameters
To enter values
To save the modifi cations
28
1234
Italian
OFF
(maximum) 20
(maximum) 20
(maximum) 20
(maximum) 20
(maximum) 20
(maximum) 20
OFF