Fracarro FRPRO 06 Instructions D'emploi page 36

The "FINAL GAIN" menu allows for the modification of all mixed signals' output level with a gain that varies
from 0 to 20 dB.
The final gain performs the amplifications of all UHF inputs, B.III+DAB input, FM input and AUX input.
REMOTE POWER
SETTINGS
The remote power supply can be enabled individually for the three inputs UHF1 and UHF2.
From the "REMOTE POWER SUPPLY - 12V/24V" menu, select the voltage you want (12V or 24V DC); this
setting is valid for all the UHF inputs; therefore, it is not possible to set the remote power supply at 12V in
one input and at 24V in another input.
The maximum supplied power at 12V is 200mA, at 24V maximum 100mA.
The activation of the UHFx input remote power supply will be signaled by the switching the red LED on next
to the UHFx input.
5.5 FINAL GAIN MENU
FINAL GAIN FINAL
SETTINGS GAIN
FINAL
GAIN
5.6 REMOTE POWER SUPPLY MENU
TELE. 12V/
REMOTE POWER
24V 12V
TELE. 12V/24V
TELE. 12V/24V
UHF1
REMOTE POWER
TELE. UHF1
UHF1
UHF2
REMOTE POWER
TELE. UHF2
UHF2
36
Setting the gain level
20
To select
00
Warning 12V
YES=V / NO=X
Warning 24V
24V YES=V / NO=X
12V
24V
OFF
To select
12V
24V
ON
12V
24V
OFF
To select
12V
24V
ON
00 dB
01 dB
...
20 dB
Setting the remote power
supply voltage at 12V or 24V
To select
Enabling the remote power
supply of the UHF1 input
Enabling the remote power
supply of the UHF2 input