4. 1. INSTALLING THE PRODUCT
4.1 CONTENT OF THE PACKAGE
The following materials are inside the box:
• 3DG-PS-BU module
• Power supply cord
• Safety and installation instructions
4.2 MODULE MOUNTING
PLEASE REMEMBER THAT THE 3DG-PS-BU MODULE MUST BE INSERTED IN THE LAST SLOT OF THE
CONTROL UNIT.
1-Cut off the control unit power (if connected).
2-Mount the module in the last slot of the control unit and fix it by using the supplied screws.
3-Charge the control unit and the module by using the proper power cables
.
5. OPERATING INSTRUCTIONS
After the control unit and the module are powered, wait for the initialization of both of them (the logo Fracarro
appears on the display of the Control Unit); now you can enter the control unit menu:
● access the menu, press the "√" button, enter your user code (default code1234) and then confirm by pressing "√".
● The control unit will scan all the modules and return to the 3DG-PS-BU module in position 6.
● Check the status of the module according to the colour of the LED on the module front; see Table 1.
13