Télécharger Imprimer la page

AKG Acoustics WMS 400 Mode D'emploi page 30

Masquer les pouces Voir aussi pour Acoustics WMS 400:

Publicité

3 Setting Up
3.8.1 Selecting Frequency
Groups (Auto Group Setup)
Diagram 3: Automatic search for a
clean (interference-free) Frequency
Group.
3.8.2 Selecting Frequencies
from the Preset Screen
Diagram 4: Selecting frequencies
manually.
3.8.3 Setting Frequencies from
the MHz Screen
Diagram 4a: Setting frequencies
directly.
24
All manuals and user guides at all-guides.com
AUTO
GROUP
No CH
>1<
>NAME<
">AT<"
>NAME<
>SCAN<
">AT3.001<"
FREQ
SAVE >Y<
SAVE >N<
>FREQ<
>FREQ<
>PRG IR<
AUTO GROUP
IR
3.9.1
"AT 3.0 02"
FREQ
>NAME<
">AT<"
>GROUP<
">3.0<"
>CHANNEL<
">01<"
SAVE >Y<
>FREQ<
>PRG IR<
IR
3.9.1
The MHz screen allows you to set the frequency directly in 25 kHz increments.
"750.000"
FREQ
MHz
3 sec.
">750.000<"
MHz
">750.025<"
MHz
SAVE >Y<
>FREQ<
>PRG IR<
IR
3.9.1
Use
required channels between "1" (mini-
mum) for a single-channel system and
"12" (maximum) for a 12-channel system.
Use
Preset. The Preset name is identical to
its country ID code. Selectable Presets
include only those supporting the
selected number of channels.
The receiver will automatically find a
Group with the selected number of
clean frequencies within the selected
Preset and tune to the first clean fre-
>NAME<
quency.
">AT<"
If the receiver finds no clean frequency,
the display will revert to the previous
Preset name.
>RETRY<
>EXIT<
>RETRY<: start a new search.
SAVE >Y<: save your setting.
SAVE >N<: reject your setting.
Clean frequencies are frequencies
where the receiver finds no RF signal or
an RF signal whose level is lower than
the current threshold setting.
"750.000"
FREQ
MHz
Use
Preset.
Use
Frequency Group.
Use
quency as a Subchannel of the selected
Frequency Group.
SAVE >Y<: save your setting.
SAVE >N<
SAVE >N<: reject your setting.
>FREQ<
Preset
To call up the MHz screen, press and
hold the two arrow keys simultaneously
for three seconds.
Press
25 kHz or
by 25 kHz.
SAVE >N<
SAVE >Y<: save your setting.
>FREQ<
SAVE >N<: reject your setting.
"750.000"
FREQ
MHz
and
to select the number of
and
to select the desired
and
to select the desired
and
to select the desired
and
to select the desired fre-
to increase the frequency by
to decrease the frequency
WMS 400 V 1.10

Publicité

loading