Publicité
5.21
Setting the TS-ASI Input-Output
The TS-ASI option is a key feature for a TV analyser. It allows both input and
output transport streams. It automatically detects whether the stream is composed of
188 or 204 bytes. It can transmit in packet mode or burst mode.
To configure the TS-ASI inputs and outputs, access from the TV mode or from the
measurement mode.
From the TV mode, press the measurement configuration
SETUP menu and go to the bottom of the menu until the Enable ASI INTERFACE.
Select the option by pressing the rotary and turn it to go from OFF to ON. Press
the rotary to accept the change. There are two new options, which are:
Page 76
USER'S MANUAL. TV EXPLORER HD
Figure 56.-
Figure 57.-
[17] to access the
02/2010
Publicité
