Publicité
USER'S MANUAL. TV EXPLORER HD
Press the Measurements Configuration
CONFIGURATION menu and turn the rotary selector
which are modifiable by the user.
5.13.1 DVB-C (QAM) Digital Channel Configuration
Press the Measurements Configuration
CONFIGURATION menu and turn the rotary selector
parameters, which can be defined by user and are described below:
1)
Channel BW (channel bandwidth)
Enables the channel bandwidth to be selected up to 9.2 MHz. The selection of this
parameter is essential for the correct operation of the tuner, as it affects the
frequency separation of the carriers.
2)
Spectral inversion
If necessary, activate the Spectral inversion (On). If the spectral inversion is not
correctly selected, reception will not be correct.
3)
Symbol Rate
When selecting this function and pressing the rotary selector
choose the symbol rate.
4)
Modulation
It defines the modulation type. When selecting this function and turn the rotary
selector
[1] to choose one of the following modulations: 16, 32, 64, 128 and
256.
02/2010
[17] key to access to the
[1] to access to parameters
[17] key to access to the
[1] to access the QAM signals
[1] is possible to
Page 41
Publicité
