Publicité
USER'S MANUAL. TV EXPLORER HD
Get From Pendrive
It performs the function opposite to the previous explained one, that is, to copy
existing files from USB memory to the folders at the TV EXPLORER
To perform this function is necessary to have the same structure of folders in both
USB memory and TV EXPLORER HD.
Copy Streams to Pendrive
It copies TS files recorded from a service inside the PVR folder of the pendrive.
Normally this is the file that takes up more space and time. For this reason this
option is independent of the copy of the rest of files.
5.20.2 Connecting a computer (host) to the TV EXPLORER
To connect a TV EXPLORER
(if they are not installed yet) you have in the folder USB_DRIVERS, on the memory
support delivered with the instrument. To install drivers follow the steps described in the
manual.
Then you have to install the software NetUpdate3, which is also found in the
memory support delivered with your equipment. It allows connecting the TV EXPLORER
HD
and to perform various functions such as create and edit plans, update firmware,
etc..
Once installed all the necessary software on your computer, connect the
TV EXPLORER
HD
to the computer by using the CC-041 (mini USB male — USB male)
delivered with the equipment. After connecting, it appears an incon at the top of the
measurement screen (Figure 56 .-).
Run the program and make the connection with your equipment using the option
"Detect" on the program to access all the available features.
02/2010
HD
with a computer, you should install the drivers
Figure 55.-
HD
memory.
HD
(slave)
Page 75
Publicité
