Publicité
USER'S MANUAL. TV EXPLORER HD
5.19
PRINT SCREEN function
It is also possible to save anything that appears on the screen of the meter using
the "PRINT SCREEN" function. To save an image you only need to press the key
[10] during a few seconds. A file with the screen content in bit map format (bmp)
will be generated automatically. These files can be viewed later on using any program
that supports .bmp formats.
NOTE: There are three cases where this function can not be used: Analogue and
digital video pictures, configuration menus and OSD messages.
5.20 USB On-the-Go Function
The TV EXPLORER
communication protocol called USB On-The-Go (OTG abbreviated). This type of
communication allows the equipment to work in two different ways depending on the
element connected to the USB port: as a server (host) or as a device (slave). In general,
the TV EXPLORER
HD
slave when connecting to a computer. This function converts the PC into a much more
versatile instrument.
5.20.1 Connection of TV EXPLORER
This option allows you to copy a certain file from the TV EXPLORER
USB flashdrive or vice versa. To access these options, you should previously connect a
USB memory device (flash drive, portable hard drive, etc ...) to the mini USB female port
of the instrument. To do this use the CC-045 cable (Mini USB male - female USB)
supplied with the equipment. When the connection is working, it appears an USB icon on
the measurement screen (see picture) and the USB option becomes available on the
Utilities menu.
02/2010
HD
has a female mini USB port that uses a specific
works as a host when connecting a USB flash drive and as a
HD
Figure 53.-
(host) to a USB flashdrive (slave)
HD
to the
Page 73
Publicité
