Publicité
USER'S MANUAL. TV EXPLORER HD
The screen displays at the horizontal axis Delay and Distance of echo with regard
to the carrier. The vertical axis represents the ratio power between echo and carrier
(Figure 49.-).
You can move the vertical cursor along the horizontal axis using the rotary knob.
If the signal were not correctly locked, at the top left of the screen would appear
TS
the icon
and would not be able to start the echo finding.
Now you are ready to start to find echoes.
The steps to go through in order to find echoes are the next:
1.
Using the cursor
2.
Press the rotary knob to start finding (Figure 50.-).
Immediately, it will start scanning in order to detect whether there are echoes or
not. If it finds any echo it will be shown on the screen.
02/2010
Figure 49.- ECHOES COFDM Screen.
[6], place it on the option RUN.
Figure 50.- Finding ECHOES.
Page 69
Publicité
