Publicité
4.
Enter parameters manually to lock signal or press
Identification) for an automatic identification of the signal (Figure 47.-).
Now, the ECHOES function is available. The steps to go through in order to select
the ECHOES function are the next:
1.
Press (short pulsation) the key
Utilities.
2.
Select the option COFDM ECHOES (Figure 48.-).
3.
Press the rotary knob.
Then you will see the ECHOES screen.
Page 68
Figura 47.- Automatic identification of the signal.
Figure 48.-. UTILITIES Menu.
USER'S MANUAL. TV EXPLORER HD
[22] (Utilities) to access the menu
[25] (Automatic
02/2010
Publicité
