Publicité
Upgrade
A computer with Windows XP/7/8/10 system is required.
1. Go to www.topdon.com/products/artilink400, click [Download] to
enter the download page. Then download and install the Topdon
PC Suite to your computer.
2. Connect the scanner to your computer using the USB cable.
3. Open the Topdon PC Suite application and log in to the Topdon
account.
(If it is the first time you purchase the Topdon product and you don't
have an account, please register with your email.)
4. Register the scanner (If you have registered it, just ignore), the
information of the scanner will be shown on the My Device
interface. Confirm the serial number is correct.
5. Select [Upgrade].
6. Select the appropriate firmware version, then click [Upgrade] to
install the upgrade.
7. The scanner will be initialized automatically the first time you use
it after the upgrade.
Publicité
