Scope Of Delivery - Reely SKY X-Trema 330L Notice D'emploi



5. Scope of Delivery

Before you start assembly, check the parts for the scope of delivery of your model.
• Fuselage with canopy
• Left and right wings
• Left and right elevator rudders
• Rudder
• Motor cowl
• Aluminium plug-in pipes for wing and elevator
• Main landing gear, tail spur, wheel cover, wheels
• Small parts (screws and linkage parts)
• Operating instructions
The following components not included in delivery are required for assembly and operation:
Assembly:
Soldering gun, cutter knife, screwdriver, 30-minute epoxy resin, possibly thixotropic agents (micro-balloon or cotton flock) for thickening the resin, super glue
and sand paper.
Attention!
Observe the safety information of the respective manufacturer when using glues and work with glues in well-ventilated rooms only.
Operation:
Flying requires a suitable (computer) remote control system with at least 5 channels, 5 standard-size servos (2x aileron servos with at least 75 Ncm thrust, 2x
elevator servos with at least 60 Ncm thrust, 1x rudder servos with at least 100 Ncm thrust), one brushless motor (as of 1800 Watt output) with matching speed
controller, a suitable 8- to 10-cell LiPo-flight battery with approx. 4500 mAh and the associated plug connectors.
Practical advice:
For a model like the „X-Trema 330L", we recommend use of a state-of-the-art 2.4 GHz computer remote control system with mixing functions. In this
case, you have the option of putting every servo to a separate receiver output to thus set every servo individually.
See our catalogues or our website at www.conrad.com for tried and tested accessories.
21