Mounting The Receiver And Receiver Power Supply; Mounting The Canopy - Reely SKY X-Trema 330L Notice D'emploi

s) Mounting the Receiver and Receiver Power Supply
Depending on the system (electrical, motor or combustion engine) and
components used (e.g. with or without BEC for power supply), concrete
information on installation is not possible here either.
Figure 9 shows one of many options for installation of servo, receiver,
receiver power supply and flight battery in the area before the plug.
Try out several options with the objective of finding the right centre of
gravity by proper placement without trimming lead if possible.
Figure 9
t) Mounting the Canopy
The canopy is held with two guide pins at the front and screwed on with two screws M3 x 20 mm at the sides.
30