Publicité
en-us_main.book.book Page 37 Friday, June 14, 2024 3:40 PM
Additional unification kits can be purchased from the Signature Kitchen Suite homepage
(www.signaturekitchensuite.com). The part number of the kit is SKSFJ800P.
5
Place the appliances right next to each other. Attach the two appliances together by installing
connection brackets between the two appliances at the top and bottom.
6
Insert the provided pin into both cover rails at the top of the combined units.
NOTE
• If retrofit installing 18" and 36" columns in a 53 1/2" (1359 mm) wide enclosure, trim 1/4" (6.4 mm) off of
one side of both cover rails.
7
Insert the filler strip in the space between the appliances. The filler strip is included with the
unification kit.
SPECIAL INSTALLATIONS
37
Publicité
