Signature Kitchen Suite SKSFD4826SP Manuel D'installation page 31

en-us_main.book.book Page 31 Friday, June 14, 2024 3:40 PM
• To install, align the trim with the front and rear flanges on the bracket, then snap the trim into place by
pushing it toward the back of the panel. There is a magnet on the back of the trim that will attach the
trim to the door.
Installing the Upper Trim (Finish) on the Drawer Fronts
• Assemble the upper trim
Upper trim
a
Attaching the Badge
Attach the badge to a position which is 1 3/16" (30 mm) from the top of the right door panel and 1 3/16" (30
mm) from the right side horizontally.
on the top of the drawer front. Repeat for all drawer fronts.
a
INSTALLATION 31