Publicité
Model - Modello - Modèle
Modell - Modelo - Modelo
Constructeur - Fabbricante
Manufacturer - Hersteller
Fabricante - Fabricante
29.
TEMPERATURE SETTING AND CONTROL
with EVCO
Each refrigerating appliance is provided with an electronic control for automatic maintenance of the
appropriate pre-established temperature inside the tank. This temperature adjuster is gauged by
the factory and should not be touched by the user. Only if the average internal temperature is too
cold or not cold you can increment or decrement the temperature:
• Unlock the electronic controller by hold down "SET" button for 5 sec. (on the display the word
"UNLOCK" will appear).
• Press the (SET) key in order to see on display the temperature set point.
• Press the (▲) key or the (▼) key in order to increment or decrement the temperature
set point.
• Press the (SET) key in order to store the new temperature set point.
LIGHT SWITCH
(Short pressure)
with Elitech
Each refrigerating appliance is provided with an electronic control for automatic maintenance
of the appropriate pre-established temperature inside the tank. This temperature adjuster is
gauged by the factory and should not be touched by the user. Only if the average internal
temperature is too cold or not cold you can increment or decrement the temperature:
1.
Press the
(SET - for 3 sec.)
2.
Press the (▲) key or the (▼) key in order to increment or decrement the temperature
set point.
3.
Press the (SET) key in order to store the new temperature set point.
GLEE 45 LITE/PRIME V3
GLEE 55 LITE V3
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
key in order to see on display the temperature set point
2 7 / 8 4
PAGE
UM000723
N° DOC
LIGHT SWITCH
PULSANTE DI
SBRINAMENTO MANUALE
(premendo il tasto verrà avviato lo sbrinamento)
Publicité
