Publicité
Model - Modello - Modèle
Modell - Modelo - Modelo
Constructeur - Fabbricante
Manufacturer - Hersteller
Fabricante - Fabricante
15.
USE
THE APPLIANCE IS SUITABLE FOR FREEZING PRE-PACKAGED PRODUCE.
THE APPLIANCE IS INTENDED FOR THE SOLE STORAGE OF PRE-
PACKAGED PRODUCTS.
THE APPLIANCE IS INTENDED FOR THE SOLE STORAGE OF PRE-
PACKAGED PRODUCTS.
THE
APPLIANCE
PHARMACEUTICALS.
The manufacturer cannot be held liable for damage caused by people, property or the equipment
itself due to display of products other than the afore-specified.
16.
EQUIPMENT IDENTIFICATION
•
Located on the plate affixed to the machine to detect the technical data.
•
Check the model and power supply vol tage before carrying out any operation.
•
If discrepancies are found, immediately contact the manufacturer or the company that supplied
the equipment.
1.
Manufacturer
2.
Code
3.
Conformity marking
4.
Power supply voltage (V)
5.
Power supply frequency (Hz)
6.
Absorbed electrical power (W)
7.
Absorbed electrical power in defrosting (W)
8.
Light max. power (W)
9.
Gross volume
10. Type and quantity of refrigerant
1 1. Climate class
It is strictly forbidden to remove, tamper with the plate and change
or alter the data contained in it.
17.
POSITIONING
The equipment has 4 one-directional wheels and 2
adjustable shelves, to stop and position the equipment
screw in or out the feet 10 mm lower than the wheels.
It is strictly necessary after positioning to
stabilise the equipment on the ground.
GLEE 45 LITE/PRIME V3
GLEE 55 LITE V3
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
CANNOT
BE
USED
PAGE
FOR
THE
PRESERVATION
1
6
5
4
7
9
8
2 2 / 8 4
UM000723
N° DOC
OF
2
10
11
3
11
*Example of data plates
Publicité
