Publicité
Model - Modello - Modèle
Modell - Modelo - Modelo
Constructeur - Fabbricante
Manufacturer - Hersteller
Fabricante - Fabricante
13.
CHOICE OF THE INSTALLATION SITE
In selecting the place of installation, ensure that the following instructions are observed, this being
vital for proper and troublefree working of the cabinet:
•
Do not install the cabinet in the vicinity of heating radiators or other heat sources.
•
Do not install the cabint where it is exposed to direct sun light (e.g. through windows).
•
Do not expose the refrigeration unit to air currents from fans, open doors, conditioning units.
•
Keep the air intake and outlet area around the plinth area of the cabinet clear of cartons and
other obstacles.
•
It is necessary taht the condensing unit obtains a good circulation of air around it; also the area
around the condensing unit should not be obstructed by boxes or other objects; keep a distance
from the wall of 10 cm. at least.
14.
NOTES AND WARNINGS
The appliance described in this manual conforms with Machine Directive 2006/42/CE.
The content of this manual is technical and the property of EPTA s.p.a. It is forbidden to reproduce,
distribute or modify entirely or partially its content without written authorisation.
The owner company safeguards its rights pursuant to legislation in force.
Read the manual carefully and adhere to the contents before installing and using
the appliance.
The company cannot be held in any way liable for any damage to people, animals or the product
conserved in the event of:
•
Improper use of the equipment or use by unsuitable or unauthorised staff.
•
Incorrect installation or power supply not suitable for the appliance.
•
Non-compliance with this manual.
•
Non-compliance with the maintenance program.
•
Unauthorized modifications to the appliance.
•
Installation of non-original spare parts on equipment.
•
Installation and use of the equipment for aims differing from those specified in this manual.
•
Tampering with or damage to the power supply cable.
Responsibility for application of the safety provisions outlined below is the responsibility of the
technical staff responsible for the activities planned on the equipment, who must ensure the
authorised staff:
•
Are qualified to perform the task requested
•
Know and strictly comply with the provisions contained in this document
•
Know and apply the general safety standards applicable to the equipment.
Tampering with or unauthorised replacement of one or more parts of the equipment,
use of accessories that change its use and use of spare parts differing from those
recommended can cause risks of accidents.
Any intervention on the equipment strictly requires disconnection of the power
socket and however no guard (grids, casings) should be removed by unqualified
staff; strictly avoid operating the freezer with these guards removed.
GLEE 45 LITE/PRIME V3
GLEE 55 LITE V3
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
2 1 / 8 4
PAGE
N° DOC
Air-Condition
UM000723
Publicité
