Publicité
Depth of Drive Adjustment
(Fig. 16)
The depth to which fasteners are driven into
the work piece can be adjusted using the
Depth Setting Wheel 5 on the side of the
nailer.
Turn the Depth Setting Wheel 5 down to de-
crease the drive depth.
Turn the Depth Setting Wheel 5 up to in-
crease drive depth.
Fig. 16
5
Operation
Built-in Work Light
(Fig. 1, Fig. 2)
Your nailer is equipped with an LED Work
Light 11 for better visibility when using the
nailer.
The LED will stay on for 10 seconds after the
Trigger 6 is pressed.
5
19
Publicité
