Publicité
OPERATION AND FUNCTIONS
OPERATIVIDAD Y FUNCIONAMIENTO
assembly by the motion control lever (8), move the keys
towards the cutter (1) and tracer (2).
- Push the handle (6) back inwards to disable clamp carriage
assembly rotation, previously setting clamp carriage assem-
bly rotation to an intermediate position.
- We recommend working slowly, without forcing the cutter.
- If the duplication process produced any burrs on the copy,
these can be removed using the brush that is provided with
the machine for this purpose.
5.2.3 Copying flat or locker keys
See Figure 9
- Secure the keys in side 3 of the clamps.
Raise the protective screen (16) and press the safety switch
(15).
- Turn the machine on and, while holding the carriage
assembly by the motion control lever (8), move the keys
towards the cutter (1) and tracer (2).
- Push the handle (6) back inwards to disable clamp carriage
assembly rotation, previously setting clamp carriage assem-
bly rotation to an intermediate position.
- We recommend working slowly, without forcing the cutter.
- If the duplication process produced any burrs on the copy,
these can be removed using the brush that is provided with
the machine for this purpose.
13
13
EN
E
Publicité
