Publicité
MACHINE CHARACTERISTICS
CARACTERÍSTICAS DE LA MAQUINA
To recharge the battery, just connect the power adapter su-
pplied with the machine to a 220-110 V power supply and the
Jack connector (14) located on the rear of the machine.
1.
Make sure that the yellow connector on
the battery is connected. Otherwise,
the battery will not charge.
1.
To extend battery service life, we re-
commend not using the machine while
it is being charged.
1.
Always use original power adapters
and cables.
1.
The mains connection must have an
Earthing connection.
4.5.4 Clamp
The clamp is designed to hold a different family of keys on
each of its three sides.
Side 1: For copying male or female single- or double-bladed
mortice keys.
Side 2: For copying forward-cut keys.
Side 3: For copying cylinder or locker keys.
For more details, see the KEY COPYING section of this ma-
nual.
11
11
EN
E
Publicité
