Publicité
Loosen the hexagonal socket head screw
with the socket head wrench
Loosen the lock nut
Pull the upper support tube
dle support tube
16
support tube
all the way out.
20
Tighten the lock nut
Fix the joint using the hexagonal socket head
screw
and the socket head wrench
18
Now adjust the upper support tube
and beyond the base
Loosen the lamp ring
Place the fabric lamp shade
and secure the fabric lamp shade
lamp ring
.
3
Use a clean, lint-free cloth to insert the light
bulb
.
4
Insert the E27 bulb
clockwise to secure.
Plug the connector into a socket that has been
professionally installed.
Note: The heavy net weight of the fabric lamp
shade
greatly limits lateral positioning of
2
the fabric lamp shade
Your light is now ready to use.
Switching the lamp on / off
Use the ON / OFF foot switch
lamp on and off.
Adjusting the light
CAUTION! RISK OF BURNS DUE TO
HOT SURFACES!
Allow the lamp to cool down completely.
Note: Only adjust the lamp shade when the lamp
is off.
Move the fabric shade
sition.
Start-up / Changing the bulb / Maintenance and cleaning
18
.
17
.
19
out of the mid-
20
. Be sure to pull the upper
to secure the connection.
19
.
17
forward
20
.
6
from the lamp socket
3
over the socket
2
using the
2
into the socket and turn
4
.
2
to turn the
12
into the desired po-
2
Changing the bulb
When replacing the illuminant, first disconnect the
light from the mains. To do so, remove the fuse or
switch off the circuit breaker in the fuse box
(0 position).
CAUTION! RISK OF BURNS DUE TO
HOT SURFACES!
Allow the light to cool down completely.
.
Only replace the lamp
1
pletely cooled down.
Use a clean, lint-free cloth when replacing the
bulb
.
4
Turn the defective bulb
the bulb socket.
Only use LED light bulbs
chapter „Technical Data".
Insert the new bulb
turn it clockwise to tighten it. Ensure that it is
positioned correctly.
Reinsert the fuse or switch the circuit breaker
back on.
Maintenance and cleaning
SHOCK!
First unplug the mains plug from the socket.
SHOCK!
For electrical safety, never clean the light with
water or other liquids, or immerse it in water.
CAUTION! RISK OF BURNS DUE TO
HOT SURFACES!
Allow the lamp to cool down completely.
Do not use solvents, benzene or similar sub-
stances. They could damage the light.
Only use a dry, lint-free cloth for cleaning.
RISK OF ELECTRIC SHOCK!
once it has com-
4
anticlockwise out of
4
specified in the
4
into the bulb socket and
4
DANGER OF ELECTRIC
DANGER OF ELECTRIC
GB/IE
17
Publicité
