Publicité
How to Install
Installing the Handle
1. Insert the handle into the port on the vacuum. The handle is installed when
you hear a click. Then make sure the handle is secured in place.
2. The vacuum is in sleep mode when it is used for the first time or has not
been used for a long time (30 minutes). In this case, the vacuum will not be
charged when it is placed on the base station. You can press any button on
the vacuum to activate it.
Click into Place
Removing the Handle
1. To remove the handle, insert a screwdriver into the hole on the back of the
vacuum as illustrated to press the handle release button, and simultaneously
pull the handle upwards vertically.
6
Publicité
