Publicité
SETTING THE POWER OF CONTROLLED DEVICES
In order to adapt the controller to the device concerned and to estimate the energy
consumed, it is necessary to adjust the power of the device.
Power settings can be made for each
paired device. Depending on the number of
devices, you start setting the power for the
first device, then the second device, all the
way to the last device.
You can identify the device number on the
display when setting the power.
(WARNING! Incorrect power settings would cause control anomalies.)
1. Preset value: 500 W. Select a value
between 300 W and 2,000 W. The
power is indicated on the label of the
controlled device. Set up by pressing
the
or
2. To save and automatically move to the next power setting of a paired device, press
the
button.
3. To exit the expert settings, press the
FACTORY RESET
If PIN code protection is deactivated, the user, installation and expert settings are re-
initialized:
button.
button three times.
55
EN
Publicité
