Publicité
INSTALLATION
• Recommended location
This operation is reserved for a qualified professional installer.
EN
Your remote controller has
a temperature sensor that
measures the temperature
of the room where it is
installed.
Depending
parameters,
commands to the receivers
with which it is paired. To
ensure accurate readings
and effective control, it must
be installed on an interior
wall approximately 1.5 m
above floor level, out of the
reach of direct sunlight and
other sources of heat or cold
(radiators, permanent draught, ...). It is also recommended to keep a minimum distance
of 30 cm between the radiator and the remote controller.
Important:
- For proper operation of the product, ensure that the remote controller is
not placed near an area that could be affected by interference from another
source, such as a wireless transmitter or receiver, TV, computer, etc.
- The remote controller measures the temperature at the location of its
installation. It does not take into account temperature differences that may
exist between different places in the house.
on
various
it
sends
OK
4
Publicité
