Publicité
-
If the ambient temperature reaches the
maximum temperature during Boost mode:
The fan switches off, but the Boost mode
is still active: the countdown is still running
and displayed, the Boost symbols and the
EN
heating indicator flash on the display. When
the temperature drops below the maximum
allowable temperature, the fan and the heater
will restart until the countdown is over.
-
Second press: cancellation of the Boost function
The cursor moves above the previous active mode and the temperature settings are
displayed.
SUPER COMFORT
This function is available for heaters with a hot air fan.
The fan can be used for instantaneous supplementary heating in case of a significant
difference between the ambient temperature and the desired set temperature.
The Super Comfort function is activated if the difference between the ambient temperature
and the set temperature is greater than 2°C. By default, the Super Comfort mode is
activated (see the section User settings, subsection Super Comfort mode on page 18).
Example: The device is set to 17.5°C in Eco mode
and you decide to switch to Comfort mode: the
difference between 21°C and 17.5°C is 3.5°C, i.e.
more than 2°C. The fan will automatically start to help
raise the temperature and reach the desired 21°C.
The Boost symbol and the heating indicator will
appear on the display and the selected mode
indicator will flash.
The display alternates between
Super Comfort mode stops if:
- The difference is less than or equal to 0.5°C.
- There is still a difference of more than 2 °C after 1 hour in Super Comfort mode.
Comment: Super Comfort mode is only activated in Comfort and Automatic Comfort
mode.
and the set Super Comfort temperature.
18
Publicité
