Publicité
2. If the ambient temperature difference is positive, for example:
Temperature settings (desired) = 19°C
Ambient temperature (measured with a reliable thermometer) = 21°C
Measured difference = +2°C
EN
Follow the following steps to modify:
Sensor temperature = 24°C
(The measured temperature may
vary depending on the location of the
remote controller in the room).
Increase the temperature measured by
the ambient temperature sensor by 2°C
by pressing
In
our
example,
measured by the sensor changes from
21°C to 23°C.
To confirm the new value, press
. The calibration settings for the next
paired device are displayed.
Perform the same steps to set the
calibration, if required, for this second
product, press the
confirm the new value.
.
the
temperature
button to
Important: These changes should be carried out by a qualified
engineer. They should be made at the factory or on site when
first installed.
54
Publicité
